# SMA Energy Meter Binding
This Binding is used to display the measured values of a SMA Energy Meter device. It shows purchased and grid feed-in power and energy.
# Supported Things
This Binding supports SMA Energy Meter devices.
The Energy Meter is discovered by receiving data on the default multicast IP address.
# Binding Configuration
No binding configuration required.
# Thing Configuration
Usually no manual configuration is required, as the multicast IP address and the port remain on their factory set values. Optionally, a refresh interval (in seconds) can be defined.
- powerIn Purchased power [W]
- powerOut Grid feed-in power [W]
- energyIn Purchased energy [kWh]
- energyOut Grid feed-in energy [kWh]
# Full example