# VolvoOnCall Binding

This binding integrates the Volvo On Call (opens new window) compatible vehicles. The integration happens through the WirelessCar Remote API.

# Supported Things

All cars compatible with Volvo On Call shall be supported by this binding.

# Discovery

Once a VocApi Bridge has been created with according credential, vehicles connected to this account will automatically be detected.

# Binding Configuration

The binding has no configuration options itself, all configuration is done at 'Things' level.

# Bridge Configuration

The 'VolvoOnCall API' bridge uses the owner's email address and password in order to access the VOC Remote API. This is the same email address and password as used in the VolvoOnCall smartphone app, that allows to remotely control your car(s).

Parameter	Description	Required
username	Username from the VolvoOnCall app (email address)	yes
password	Password from the VolvoOnCall app	yes

Once the bridge created, you will be able to launch discovery of the vehicles attached to it.

# Thing Configuration

The 'VolvoOnCall API' bridge uses the owner's email address and password in order to access the VOC Remote API.

Parameter	Name	Description	Required
vin	Vin	Vehicle Identification Number of the car	yes
refreshinterval	Refresj Interval	Interval in minutes to refresh the data (default=10)	yes

# Channels

All numeric channels use the UoM feature (opens new window). This means you can easily change the desired unit e.g. miles/h instead of km/h just in your item definition.

Some of the channels are only available for specific cars and models. These properties are added to the Thing automatically by the binding when an API call is made.

Following channels are currently available:

Channel Type ID	Item Type	Description	Remark
doors#frontLeft	Contact	Door front left
doors#frontRight	Contact	Door front right
doors#rearLeft	Contact	Door rear left
doors#rearRight	Contact	Door rear right
doors#hood	Contact	Hood
doors#tailgate	Contact	Tailgate
doors#carLocked	Switch	Is the car locked	Can also be used to lock / unlock the car. Only if property 'lock' is true.
windows#frontLeftWnd	Contact	Window front left
windows#frontRightWnd	Contact	Window front right
windows#rearLeftWnd	Contact	Window rear left
windows#rearRightWnd	Contact	Window rear right
odometer#odometer	Number:Length	Odometer value
odometer#tripmeter1	Number:Length	Trip meter 1 value
odometer#tripmeter2	Number:Length	Trip meter 2 value
tank#fuelAmount	Number:Volume	Amount of fuel left in the tank
tank#fuelLevel	Number:Dimensionless	Percentage of fuel left in the tank
tank#fuelAlert	Switch	Alert if the amount of fuel is running low	ON when distancy to empty < 100
tank#distanceToEmpty	Number:Length	Distance till tank is empty
position#location	Location	Location of the car
position#locationTimestamp	DateTime	Timestamp of the latest confirmed location
tyrePressure#frontLeftTyre	Number	Tyrepressure front left tyre	Normal / LowSoft
tyrePressure#frontRightTyre	Number	Tyrepressure front right tyre	Normal / LowSoft
tyrePressure#rearLeftTyre	Number	Tyrepressure rear left tyre	Normal / LowSoft
tyrePressure#rearRightTyre	Number	Tyrepressure rear right tyre	Normal / LowSoft
other#averageSpeed	Number:Speed	Average speed
other#engineRunning	Switch	Is the car engine running
other#remoteHeater	Switch	Start the car remote heater	Only if property 'remoteHeater' is true
other#preclimatization	Switch	Start the car preclimatization	Only if property 'preclimatization' is true
other#brakeFluidLevel	Number	Brake fluid level	Normal / Low / VeryLow
other#washerFluidLevel	Number	Washer fluid level	Normal / Low / VeryLow
other#serviceWarning	String	Warning if service is needed
other#bulbFailure	Switch	ON if at least one bulb is reported as failed
battery#batteryLevel	Number:Dimensionless	Battery level	Only for Plugin hybrid / Twin Engine models. The binding reports undefined in situations where it knows the API is misleading.
battery#batteryLevelRaw	Number:Dimensionless	Battery level	Only for Plugin hybrid / Twin Engine models. Raw figure from the API, can be misleading.
battery#batteryDistanceToEmpty	Number:Length	Distance until battery is empty	Only for Plugin hybrid / Twin Engine models
battery#chargeStatus	String	Charging status	Only for Plugin hybrid / Twin Engine models
battery#chargeStatusCable	Switch	Is the cable plugged in	Only for Plugin hybrid / Twin Engine models
battery#chargeStatusCharging	Switch	Is the car currently charging	Only for Plugin hybrid / Twin Engine models
battery#chargeStatusFullyCharged	Switch	Is the car fully charged	Only for Plugin hybrid / Twin Engine models
battery#timeToHVBatteryFullyCharged	Number:Time	Time in minutes until the battery is fully charged	Only for Plugin hybrid / Twin Engine models
battery#chargingEnd	DateTime	Calculated time when the battery is fully charged	Only for Plugin hybrid / Twin Engine models
lasttrip#tripConsumption	Number:Volume	Last trip fuel consumption
lasttrip#tripDistance	Number:Length	Last trip distance
lasttrip#tripStartTime	DateTime	Last trip start time
lasttrip#tripEndTime	DateTime	Last trip end time
lasttrip#tripDuration	Number:Time	Last trip duration
lasttrip#tripStartOdometer	Number:Length	Last trip start odometer
lasttrip#tripStopOdometer	Number:Length	Last trip stop odometer
lasttrip#startPosition	Location	Last trip start location
lasttrip#endPosition	Location	Last trip end location

# Events

Channel Type ID	Options	Description
other#carEvent
	CAR_STOPPED	Triggered when the car has finished a trip
	CAR_MOVED	Triggered if the car mileage has changed between two polls
	CAR_STARTED	Triggered when the engine of the car went on between two polls

# Full Example

demo.things:

Bridge volvooncall:vocapi:glh "VoC Gaël" @ "System" [username="[email protected]", password="mypassword"]
{
    Thing vehicle XC60 "XC60" @ "World" [vin="theCarVIN", refreshinterval=5]
}

demo.items:

Group gVoc "Volvo On Call"

Group:Contact:OR(OPEN,CLOSED) gDoorsOpening "Portes"     (gVoc)
Contact Voc_DoorsTailgate           "Tailgate"                              (gDoorsOpening)         {channel="volvooncall:vehicle:glh:XC60:doors#tailgate"}
Contact Voc_DoorsRearRight          "Rear right"                            (gDoorsOpening)         {channel="volvooncall:vehicle:glh:XC60:doors#rearRight"}
Contact Voc_DoorsRearLeft           "Rear Left"                             (gDoorsOpening)         {channel="volvooncall:vehicle:glh:XC60:doors#rearLeft"}
Contact Voc_DoorsFrontRight         "Passager"                              (gDoorsOpening)         {channel="volvooncall:vehicle:glh:XC60:doors#frontRight"}
Contact Voc_DoorsFrontLeft          "Conducteur"                            (gDoorsOpening)         {channel="volvooncall:vehicle:glh:XC60:doors#frontLeft"}
Contact Voc_DoorsHood               "Hood"                                  (gDoorsOpening)         {channel="volvooncall:vehicle:glh:XC60:doors#hood"}

Group:Contact:OR(OPEN,CLOSED) gWindowsOpening "Fenêtres"   (gVoc)
Contact Voc_WindowsRearRightWnd     "Rear right"                            (gWindowsOpening)       {channel="volvooncall:vehicle:glh:XC60:windows#rearRightWnd"}
Contact Voc_WindowsRearLeftWnd      "Rear Left"                             (gWindowsOpening)       {channel="volvooncall:vehicle:glh:XC60:windows#rearLeftWnd"}
Contact Voc_WindowsFrontRightWnd    "Passager"                              (gWindowsOpening)       {channel="volvooncall:vehicle:glh:XC60:windows#frontRightWnd"}
Contact Voc_WindowsFrontLeftWnd     "Conducteur"                            (gWindowsOpening)       {channel="volvooncall:vehicle:glh:XC60:windows#frontLeftWnd"}

Switch Voc_DoorsCarLocked           "Verouillée"                            (gVoc)                  {channel="volvooncall:vehicle:glh:XC60:doors#carLocked"}
Number:Length Voc_Odometer          "Kilométrage [%d %unit%]"               (gVoc)     {channel="volvooncall:vehicle:glh:XC60:odometer#odometer"}
Number:Dimensionless Voc_FuelLevel  "Fuel Level"                <sewerage>  (gVoc)     {channel="volvooncall:vehicle:glh:XC60:tank#fuelLevel"}
Switch Voc_Fuel_Alert               "Niveau Carburant"          <siren>     (gVoc)   {channel="volvooncall:vehicle:glh:XC60:tank#fuelAlert"}
Number Voc_Fluid_Message            "Lave Glace"                    (gVoc)                  {channel="volvooncall:vehicle:glh:XC60:other#washerFluidLevel"}
Location Voc_Location               "Location"                      (gVoc)                  {channel="volvooncall:vehicle:glh:XC60:position#location"}
DateTime Voc_Location_LUD           "Timestamp [%1$tH:%1$tM]"   <time>      (gVoc)                  {channel="volvooncall:vehicle:glh:XC60:position#locationTimestamp"}
Switch Voc_Fluid_Alert              "Alerte Lave Glace"         <siren>     (gVoc)

voc.sitemap:

sitemap voc label="Volvo On Call" {

    Frame label="Etat Véhicule" {
        Switch item=Voc_DoorsCarLocked
        Switch item=Voc_Location_LUD mappings=[REFRESH='MAJ !']
        Default item=Voc_Odometer
        Default item=Voc_FuelLevel
        Default item=Voc_Fuel_Alert
        Default item=Voc_Fluid_Message
        Default item=Voc_Fluid_Alert
    }

    Frame label="" {
        Mapview item=Voc_Location label="" height=10
    }

    Frame label="Opening Status" {
        Group item=gDoorsOpening
        Group item=gWindowsOpening
    }
}

# Rule Actions

Multiple actions are supported by this binding. In classic rules these are accessible as shown in the example below:

Example 1a: If Thing has been created using autodiscovery

 val actions = getActions("volvooncall","volvooncall:vehicle:thingId")
 if(null === actions) {
        logInfo("actions", "Actions not found, check thing ID")
        return
 } else {
        actions.openCarCommand()
 }

Example 1b: If Thing has been created using script

 val actions = getActions("volvooncall","volvooncall:vehicle:bridgeId:thingId")
 if(null === actions) {
        logInfo("actions", "Actions not found, check thing ID")
        return
 } else {
        actions.openCarCommand()
 }

# closeCarCommand()

Sends the command to close the car.

# openCarCommand()

Sends the command to open the car.

# engineStartCommand(runtime)

Sends the command to start the engine for a given runtime. Default 5 minutes.

Parameters:

Name	Description
runtime	Integer - Time for the engine to stay on

# heaterStartCommand()

Sends the command to start the car heater (if remoteHeaterSupported).

# heaterStopCommand()

Sends the command to stop the car heater (if remoteHeaterSupported).

# preclimatizationStartCommand()

Sends the command to start the car heater (if preclimatizationSupported).

# preclimatizationStopCommand()

Sends the command to stop the car heater (if preclimatizationSupported).

# honkBlinkCommand(honk, blink)

Activates lights and/or the horn of the car

Parameters:

Name	Description
honk	Boolean - Activates the car horn
blink	Boolean - Activates the car lights

Caught a mistake or want to contribute to the documentation? Edit this page on GitHub (opens new window)

← Volumio Warmup →